Screening for an Alternative to Ni-Based Superalloys in Turbine Blades for the Power Industry

Authors

  • Tianxiang Gao

DOI:

https://doi.org/10.54097/bw399s44

Keywords:

Turbine blade; material selection; superalloy; power industry.

Abstract

Turbine blades in the power industry operate under extreme conditions, requiring materials that can withstand high temperatures, mechanical stress, oxidation, and corrosion. Ni-based superalloys have long been the primary choice due to their exceptional balance of mechanical properties and resistance to harsh environments. However, as operational demands increase, Ni-based superalloys are reaching their performance limits, driving the search for alternative materials. This paper explores the process of screening a wide range of materials to identify the most suitable candidates for turbine blade applications. Through this process, the dominance of Ni-based superalloys is reaffirmed. After determining that Co-based superalloys are the best alternative, a comparative analysis is conducted to evaluate the strengths and limitations of both materials in the context of turbine blade applications. While Co-based superalloys demonstrate superior high-temperature performance, oxidation resistance, and creep resistance, they face challenges such as higher density and increased manufacturing costs.

Downloads

Download data is not yet available.

References

[1] Zha Ling-Sheng. Fracture failure analysis on engine turbine blade. Failure Analysis and Prevention, 2013.

[2] Pace Mark Thomas and Thomson Robert Charles. Oxidation of MCrAlY coatings on Ni based superalloys. Energy Materials, 2007, 2(3): 181-190. DOI: https://doi.org/10.1179/174892408X373545

[3] Tawancy Hamid and Al-Hadhrami Latif. Comparative performance of turbine blades used in power generation: Damage vs. microstructure and superalloy composition selected for the application. Engineering Failure Analysis, 2014, 46: 76-91. DOI: https://doi.org/10.1016/j.engfailanal.2014.08.007

[4] Kitaguchi Hiroto. Microstructure-property relationship in advanced Ni-based superalloys. Open access peer-reviewed, 2012, 2: 210. DOI: https://doi.org/10.5772/52011

[5] Rao K. Ankamma. Nickel based superalloys–properties and their applications. International Journal of Management, Technology And Engineering, 2018, 8: 268-277.

[6] Donachie Matthew John and Donachie Stephen John. Superalloys: A technical guide (2nd ed.). ASM International, 2002. DOI: https://doi.org/10.31399/asm.tb.stg2.9781627082679

[7] Mukherji Debasis, Strunz Peter, Gilles Robert, et al. Current status of Co-Re-based alloys being developed to supplement Ni-based superalloys for ultra-high temperature applications in gas turbines. Kov. Mater., 2015, 53: 1-8. DOI: https://doi.org/10.4149/km_2015_4_287

[8] Wu Xiaoxu, Makineni Sumanth, Liebscher Christian, et al. Unveiling the Re effect in Ni-based single crystal superalloys. Nature Communications, 2020, 11: 389. DOI: https://doi.org/10.1038/s41467-019-14062-9

[9] Caron Pierre and Khan Tasadduq. Evolution of Ni-based superalloys for single crystal gas turbine blade applications. Aerospace Science and Technology, 1999, 3(8): 513-523. DOI: https://doi.org/10.1016/S1270-9638(99)00108-X

[10] Valenza Fabio, Muolo Maria and Passerone Andrea. Wetting and interactions of Ni- and Co-based

Downloads

Published

18-02-2025

How to Cite

Gao, T. (2025). Screening for an Alternative to Ni-Based Superalloys in Turbine Blades for the Power Industry. Highlights in Science, Engineering and Technology, 125, 223-232. https://doi.org/10.54097/bw399s44